NOTE: CompuSave is not responsible for any damage which may occur to your printer or supplies by following the below steps. If you are unsure of how to proceed, please contact us for paid support options.
To enter Maintenance Mode on some larger Brother laser multi-function units (tested on MFC-8910DW):
- Press Menu
- Press Black Start button
- Press up arrow 4 times
(do above in less than 2 seconds)
The machine should show MAINTENANCE
- to print a Maintenance Report, press 77
(This report shows page count, error history, parts life, etc.)
- to exit Maintenance Mode, press 99
Below are some other tips that may help with maintenance mode:
(taken from http://www.manualslib.com/download/869821/Brother-Dcp-8110dn.html)
The maintenance mode functions shaded in the table can be used by end users.
CompuSave Computers Inc.
Your Technical Team - On Your Side
Call or Text: 519-863-6336 - Email: support@compusave.ca
Website: www.CompuSave.ca
Posted: September 2015
Was this article helpful?
That’s Great!
Thank you for your feedback
Sorry! We couldn't be helpful
Thank you for your feedback
Feedback sent
We appreciate your effort and will try to fix the article